Maxim M30B Especificações descarregar pdf (Página 4)

_________________________________________________________________________________________________

DS33M33DK

Rev: 102108 4 of 48

3. File Locations

This demo kit relies upon several supporting files, which are provided on the CD and are available as a zip file from

the Maxim website

www.maxim-ic.com/DS33M33DK. All locations are given relative to the directory in the CD/zip

file called “DS33M33_def_ini_”.

Table 3-1 shows the DS33M33, DS3154, and FPGA register definition files and

configuration files.

Table 3-1. Definition and Configuration Files

FILE NAME FILE USAGE

. \parallel_mode\ _DS33M_GlobalSonet.def Top level definition file to select in

ChipView’s register mode. This file

will autoload the remaining

definition files for the DS33M33

when parallel mode is used. (Note

the wan files still need to be loaded

(either DS)).

.\parallel_mode\DS3154DC.def

.\parallel_mode\ds33M_BufferMan.def

.\parallel_mode\ds33M_EncapDecap.def

.\parallel_mode\ds33M_GlobalEth.def

.\parallel_mode\ds33M_group.def

.\parallel_mode\ds33M_LanSubscriber.def

.\parallel_mode\DS33M_port1.def

.\parallel_mode\DS33M_port2.def

.\parallel_mode\DS33M_port3.def

.\parallel_mode\DS33M_serial_1234.def

.\parallel_mode\DS33M_TEST.def

.\parallel_mode\ds33M_Vcat.def

.\parallel_mode\Overhead_FPGA.def

DS33M33 dependent files. These

are called by

_DS33M_GlobalSonet.def file,

which is listed above.

.\parallel_mode\m33_eos_vcg0_port2_port3_mii.mfg File for manually configuring the

DS33M33 for EoS VC3 with two

ports assigned to VCG1.

.\parallel_mode\m33_eos_vc3_mii100.mfg File for manually configuring the

DS33M33 for EoS VC3 mode.

.\parallel_mode\m33_eopos_ds3.mfg File for manually configuring the

DS33M33 for EoPoS DS3 mode.

.\parallel_mode\enc_dec_lb.mfg Encap/decap loopback/

.\parallel_mode\m30_rx_tx.mfg M30 mode Rx and Tx

configuration. This file configures

the MAC for GMII mode and

requires a Gigabit Ethernet link.

.\parallel_mode\norm_ds3154_dlb.mfg

.\parallel_mode\m33_pos_au3_liu.mfg

Two files for configuring the LIU in

M33 mMode and configuring the

DS33M33 in PoS AU3 mode.

.\ spi_mode.zip Configuration mode files for SPI™

3-wire bus mode. The default

mode for this demo kit is parallel

mode. To avoid accidental use the

SPI mode files have been provided

in a zip format.

.\ ParitalConfig_DS33M_100mBit.mfg

.\ ParitalConfig_DS33M_GigaBit.mfg

Files to change Ethernet speed in

the MAC and Global Ethernet

section.

SPI is a trademark of Motorola, Inc.

1 2 3 4 5 6 7 8 9 ... 46 47

Comentários a estes Manuais

Sem comentários

Maxim M30B Especificações Página 4

Comentários a estes Manuais